HVAC Contractor in Uxbridge, MA
Boilers, radiators, and oil heat for a true Blackstone Valley mill town — 18 to 25 minutes from our Bellingham base.
Hannon Heating & Air Conditioning is an HVAC contractor serving Uxbridge, MA from Bellingham, 18 to 25 minutes out Hartford Avenue through Mendon or in on Rt 16. Uxbridge is a true Blackstone Valley mill town, with nearly a third of its homes built before 1940, and mill-town heating means boilers, radiators, and oil. That is exactly our work.
Out the Old Middle Post Road
Hartford Avenue (the old Middle Post Road) runs west from Bellingham through Mendon and into North Uxbridge; Rt 16 carries us into the town center. Either way, plan on 18 to 25 minutes from our Bellingham base. We work the whole town: North Uxbridge and Rogerson's Village by the restored Crown and Eagle Mill, Wheelockville, the streets near the Stanley Woolen Mill, and the roads out past River Bend Farm and West Hill Dam.
18–25 min
from Bellingham — Hartford Ave through Mendon, or in on Rt 16
30+ years
of oil-heat service from Paul; three-quarters of the town heats with oil
Free estimates
on replacements, with the number in writing
Boilers in the Mill Housing
Uxbridge's mill villages hold some of the oldest housing we serve — dozens of National Register properties, Federalist homes, and blocks of worker housing that heat the way they did a century ago: boilers and radiators, no ductwork in the walls. Boiler repair is the core of our Uxbridge work: circulator pumps, zone valves, cold radiators on one floor, steam in the oldest houses. Gas and oil both, and we replace the boilers that are past saving.
Three-Quarters of the Town Heats With Oil
Roughly three-quarters of Uxbridge heats with oil, which makes an annual oil burner cleaning the best habit an Uxbridge homeowner can have: new nozzle, fresh filter, a combustion test to dial the flame in. We handle no-heat repairs and Roth double-wall tank replacements too — Paul has serviced oil heat for more than 30 years.
Ductless, for Houses Built Before Ductwork
Pre-war mill housing was never built with ducts, so central air was never a simple option here. Ductless mini splits changed that: wall units in the rooms you actually use, one outdoor unit, and an installation that doesn't tear into plaster walls or period exteriors. The same equipment heats in the shoulder seasons, taking load off an old boiler. The town's 1970s–90s colonials and split-levels, meanwhile, run the ducted furnaces and central AC we repair and replace every week.
Permits in Room 203
Uxbridge permits mechanical work through the Building Department in Town Hall Room 203 at 21 South Main St, with online applications. We pull the permit, meet the inspector, and close out the job ourselves.
Frequently Asked Questions
Do you serve Uxbridge, MA?
Our mill-era house has radiators and no ducts — what can you do?
Do you service oil heat in Uxbridge?
Our 1980s colonial's system is on its last legs — repair or replace?
Ready for Reliable HVAC in Uxbridge?
Call about a repair, a tune-up, or a straight quote on a replacement. You'll talk to the person who does the work.
Mon-Fri 7am-5pm · Emergency Service Available